PowerMain distribution boards
Distribution boards and busbar systems for industry and utilities. Lugs crimped, torqued to spec and marked per connection.
- Up to 4000 A
- Busbar systems & boards
- Phases labelled L1 / L2 / L3
What we connect
Five disciplines, one crew that masters all of them. Below, per service: what we do, up to which ratings, and what you are handed at completion.
Power
Light & powerLighting and power installations
Complete installations for commercial and production buildings: power circuits, lighting, emergency lighting and all the cabling between.
- 230 / 400 V
- Power circuits & distribution
- Emergency lighting
StorageBattery storage
Connection and protection of battery systems: DC combiners, inverters and the tie-in to your main distribution.
- 5 – 250 kWh
- AC- and DC-coupled
- Peak shaving & backup
ChargingCharging infrastructure
From a single charge point to a fleet hub: the supply, the distribution and the metering underneath — that is where the real work sits.
- 11 – 400 kW
- Dynamic load balancing
- MID-certified metering
ServiceService & maintenance
Periodic inspection, thermography and a breakdown service. We know your installation because we built it.
- NEN 3140 inspection
- Thermography
- Breakdown service
Net metering ends 1 January 2027
Your surplus will be worth half. Unless you store it.
From 2027 the Dutch net-metering scheme ends; during the transition a statutory minimum feed-in tariff of 50 % of the bare supply rate applies. At the same time the grid is filling up. Storage moves your midday surplus to the evening peak — and keeps your connection out of congestion.
72kWh surplus between 9am and 3pm78 %self-consumption with 60 kWh storage≥50 %statutory feed-in tariff from 2027
Surplus to battery
Drawn from battery
Drawn from grid
Example: 30 kWp commercial roof with 60 kWh storage, a working day in May. Illustrative values — we measure your own profile during intake.
Open price indication
We break the price apart before you have to ask.
“Contact us for a price” is not an answer. This is what a typical home battery costs with us, line by line — including what is not in it.
This example is hypothetical. What you actually pay depends on the job itself — what is already there, what has to be replaced, how the cable runs — and on the travel distance to your site. A binding figure follows the intake, in writing.
| Item | Amount |
|---|---|
| Battery system 15 kWh (LFP)Brand TODO_MERK · 10-year manufacturer warranty | €6,400 |
| Inverter / AC couplingThree-phase, 10 kW, with backup changeover | €1,250 |
| Installation materialsCable 5×6 mm², board extension, type 2 surge protection | €780 |
| Labour2 engineers × 1.5 days, travel included | €1,560 |
| NEN 1010 inspection + test reportInsulation resistance, Zs, RCD trip time | €320 |
| Subtotal | €10,310 |
| ISDE subsidy (indicative)We file the application; RVO pays it out | -€1,850 |
| Indicative total | €8,460 |
This is an indication based on earlier projects, not a quotation. Not included: connection upgrade, consumer-unit replacement, chasing and breaking work, and additional work found on inspection.
Tell us what you need. A substantiated quote lands within two working days.
Four steps: what, where, when, and how we may reach you. No obligations, no sales pitch — just a calculation you can put in front of someone else.